Items where Subject is "Engineering"

Group by: Creators | Item Type
Jump to: A | B | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | U | W | Y | Z
Number of items at this level: 71.

A

Abdulrazigh, Mahfoud Y. A. and Hussain, Salim Abdallah El and Fadlallah, Abdulhakim Ibrahim (2022) Low-cost System for Transmitting and Receiving Data by 433MHz Wirelessly for Educational Purposes. Journal of Engineering Research and Reports, 22 (8). pp. 55-61. ISSN 2582-2926

Alhothali, Areej and Khurshid, Hifsa and Mustafa, Muhammad Raza Ul and Moria, Kawthar Mostafa and Rashid, Umer and Bamasag, Omaimah Omar and Kyzas, George (2022) Evaluation of Contemporary Computational Techniques to Optimize Adsorption Process for Simultaneous Removal of COD and TOC in Wastewater. Adsorption Science & Technology, 2022. pp. 1-16. ISSN 0263-6174

Athanasatos, P. and Koulocheris, D. and Costopoulos, Th. and Spitas, V. (2014) Experimental Verification of Fault Predictions in High Pressure Hydraulic Systems. Modern Mechanical Engineering, 04 (02). pp. 67-83. ISSN 2164-0165

B

Bacquian, Bryan Christian S. (2020) Wafer Thinning Process and Its Critical Manufacturability Requirements. Journal of Engineering Research and Reports, 10 (4). pp. 19-25. ISSN 2582-2926

Bacquian, Bryan Christian S. and Rodriguez, Rennier and Graycochea, Edwin M. (2020) Critical Insights in the Application of Convection and Pressure Curing in Eliminating DAF Voids. Journal of Engineering Research and Reports, 10 (4). pp. 36-42. ISSN 2582-2926

Barbosa, R. C. N. and Campilho, R. D. S. G. and Silva, F. J. G. (2023) Numerical Development and Validation of a Polyethylene Component Injection Mold. In: Techniques and Innovation in Engineering Research Vol. 7. B P International, pp. 85-96. ISBN 978-81-959996-8-2

Barra, Hamdi Muhyuddin and Chen, Soo Kien and Tamchek, Nizam and Talib, Zainal Abidin and Lee, Oon Jew and Tan, Kar Ban and Kong, Lingxue (2021) Phase, Microstructure, Thermochromic, and Thermophysical Analyses of Hydrothermally Synthesized W-Doped VO2 Nanopowder. Advances in Materials Science and Engineering, 2021. pp. 1-8. ISSN 1687-8434

Bhatti, Muhammad Yousaf and Lee, Sang-Gil and Han, Jae-Hung (2021) Dynamic Stability and Flight Control of Biomimetic Flapping-Wing Micro Air Vehicle. Aerospace, 8 (12). p. 362. ISSN 2226-4310

Bishay, Peter L. and Aguilar, Christian (2021) Parametric Study of a Composite Skin for a Twist-Morphing Wing. Aerospace, 8 (9). p. 259. ISSN 2226-4310

Bulnes, Francisco and Tello, Alejandro R. and Livera, Máximo (2014) Heat Flux Analysis in Electrical Transformers through Integral Operators of Mechanics. Modern Mechanical Engineering, 04 (02). pp. 84-107. ISSN 2164-0165

D

Daffi, R. E. and Alfa, M. I. and Ibrahim, E. S. (2020) Gis-based Analysis of Water Quality Parameters of Groundwater with Proximity to Onsite Wastes Pits in Vom Community of Jos South, Nigeria. Journal of Engineering Research and Reports, 10 (4). pp. 6-18. ISSN 2582-2926

De Giorgi, Maria Grazia and Strafella, Luciano and Ficarella, Antonio (2021) Neural Nonlinear Autoregressive Model with Exogenous Input (NARX) for Turboshaft Aeroengine Fuel Control Unit Model. Aerospace, 8 (8). p. 206. ISSN 2226-4310

Ding, Yang and Zhou, Shuang-Xi and Yuan, Hai-Qiang and Pan, Yuan and Dong, Jing-Liang and Wang, Zhong-Ping and Yang, Tong-Lin and She, An-Ming and Si, Chundi (2021) Crack Identification Method of Steel Fiber Reinforced Concrete Based on Deep Learning: A Comparative Study and Shared Crack Database. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

E

El-Mageed, Neveen B. Abd and Abdul-Muttalib, Muhammad A. and Heiba, Yasmen A. (2019) Validating Visual Modflow Numerical Model to Predict Future Impact of Brine Disposal on Groundwater. Journal of Engineering Research and Reports, 5 (1). pp. 1-9. ISSN 2582-2926

Elmeseiry, Nourhan and Alshaer, Nancy and Ismail, Tawfik (2021) A Detailed Survey and Future Directions of Unmanned Aerial Vehicles (UAVs) with Potential Applications. Aerospace, 8 (12). p. 363. ISSN 2226-4310

Enobakhare, Golden and Obakhena, Hope I. and Ogunbor, Samuel and Okundamiya, Michael S. (2022) Battery Cells and a Super-capacitor Bank Storage System: Design Trend and Strategies for Renewable Power Applications. Journal of Engineering Research and Reports, 22 (8). pp. 31-43. ISSN 2582-2926

Enobakhare, Golden and Ogunbor, S. E. and Imasuen, Peter (2022) Design and Fabrication of a Speed Breaker Mechanism for Power Generation: A Case Study of Ikpoba Hill Benin City, Nigeria. Journal of Engineering Research and Reports, 22 (8). pp. 21-30. ISSN 2582-2926

Ezzat, Safia M. (2019) Mathematical Nonlinear Goal Programming in Quality Control. Journal of Engineering Research and Reports, 5 (1). pp. 1-8. ISSN 2582-2926

F

Fang, Naiwen and Guo, Erjun and Xu, Kai and Huang, Ruisheng and Ma, Yiming and Zeng, Caiyou and Yang, Yicheng and Xie, Jilin and Cao, Hao and Torres, Miguel Angel (2021) Effect of Shielding Gas on Microstructures and Mechanical Properties of TC4 Titanium Alloy Ultranarrow Gap Welded Joint by Laser Welding with Filler Wire. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

Farhangian, Farzan and Benzerrouk, Hamza and Landry, Rene (2021) Opportunistic In-Flight INS Alignment Using LEO Satellites and a Rotatory IMU Platform. Aerospace, 8 (10). p. 280. ISSN 2226-4310

G

Gafarov, G. A. and Hashimov, Kh. Kh. (2023) Factors Affecting the Efficiency of Photovoltaic System. Journal of Engineering Research and Reports, 25 (6). pp. 77-83. ISSN 2582-2926

Gara, Navya and Ramachandran, Velmurugan and Rengaswamy, Jayaganthan (2021) Analytical and FEM Analyses of High-Speed Impact Behaviour of Al 2024 Alloy. Aerospace, 8 (10). p. 281. ISSN 2226-4310

Gomez, Frederick Ray I. (2020) AC Analysis of Differential Active Balun Topology. Journal of Engineering Research and Reports, 10 (4). pp. 1-5. ISSN 2582-2926

Guo, Miaocai (2021) Enhancing the Interlaminar Fracture Toughness and AO Resistance of CFRPs by Using Phosphorus-Containing Polymer/PEC-K Bifunctional Film. Aerospace, 8 (12). p. 365. ISSN 2226-4310

H

Huang, He and Zhang, Duo and Cheng, Lirong and Song, Zhengyang (2021) Modelling and Simulation on Penetration into Stone Concrete. Advances in Materials Science and Engineering, 2021. pp. 1-14. ISSN 1687-8434

Huang, Qi and Chen, Fei and Colangelo, Francesco (2021) Design and Performance of Ultrathin Overlay Epoxy-Rubber Concrete. Advances in Materials Science and Engineering, 2021. pp. 1-9. ISSN 1687-8434

Hyun, Wonjeong and Kim, Jina and Chae, Heesang and Lee, Changjin (2021) Passive Control of Low-Frequency Instability in Hybrid Rocket Combustion. Aerospace, 8 (8). p. 204. ISSN 2226-4310

I

Idiapho, Onoriode K. and Biu, Raphael and Odinikuku, William E. and Akusu, Onomine M. (2019) Prediction of Melting Profile of Mild Steel Weld Metals Using Regression Analysis. Journal of Engineering Research and Reports, 5 (1). pp. 1-25. ISSN 2582-2926

Ilesanmi, O. E. and Akinnuli, B. O. (2019) Design, Fabrication and Performance Evaluation of a Domestic Gas Oven. Journal of Engineering Research and Reports, 5 (1). pp. 1-10. ISSN 2582-2926

Isufaj, Ralvi and Koca, Thimjo and Piera, Miquel Angel (2021) Spatiotemporal Graph Indicators for Air Traffic Complexity Analysis. Aerospace, 8 (12). p. 364. ISSN 2226-4310

Izuddeen, M. and Naja’atu, M. K. and Ali, M. U. and Abdullahi, M. B. and Baballe, A. M. and Tofa, A. U. and Gambo, M. (2022) FPGA Based Facial Recognition System. Journal of Engineering Research and Reports, 22 (8). pp. 89-96. ISSN 2582-2926

J

Jiang, Chunsheng and Liu, Yongjie and Jiang, Yu and Li, Hengnian (2021) Orbital Design and Control for Jupiter-Observation Spacecraft. Aerospace, 8 (10). p. 282. ISSN 2226-4310

Jin, Qianpeng and Gao, Simeng and Xu, Yang and Caggiano, Antonio (2021) A Feasible and Facile Method for the Anticounterfeiting of Down Fiber. Advances in Materials Science and Engineering, 2021. pp. 1-9. ISSN 1687-8434

K

Kanu, O. P. and Leton, T. G. (2022) Indoor Air Pollution in Rumuewhera Community in Obio-Akpor Local Government Area of Rivers State, Nigeria. Journal of Engineering Research and Reports, 22 (8). pp. 62-79. ISSN 2582-2926

Kebede, Dereje and Khan, Afzal and Asha, Argaw and Benti, Chimdi Gedfa (2022) Combined Effect of Marble Dust and Waste Paper Sludge in Improving Engineering Properties of Black-cotton Soil of Gelan Area, Ethiopia. Journal of Engineering Research and Reports, 22 (8). pp. 80-88. ISSN 2582-2926

Kwon, Hyeok-Min and Lee, Dong-Kyu (2021) Modeling and Simulation of Heavy-Lift Tethered Multicopter Considering Mechanical Properties of Electric Power Cable. Aerospace, 8 (8). p. 208. ISSN 2226-4310

L

Le, Anh Thang and Nguyen, Manh Tuan and Le, Van Phuc and Caggiano, Antonio (2021) The Effect of Spent Fluid Catalytic Cracking Filler on Performance Testing of Asphalt Concrete Mixture. Advances in Materials Science and Engineering, 2021. pp. 1-17. ISSN 1687-8434

Lee, Chang-Yull and Kim, Ji-Hwan (2021) Active Flutter Suppression of Smart-Skin Antenna Structures with Piezoelectric Sensors and Actuators. Aerospace, 8 (9). p. 257. ISSN 2226-4310

Li, Dongdong and Zhang, Shaowei and Yi, Hao (2021) The Influences of Sand Content and Particle Size on the Desiccation Cracks of Compacted Expansive Soil. Advances in Materials Science and Engineering, 2021. pp. 1-11. ISSN 1687-8434

Li, Haoxu and Zhang, Zhiguo and Deng, Nianchun and Di Sarno, Luigi (2021) Temperature Field and Gradient Effect of a Steel-Concrete Composite Box Girder Bridge. Advances in Materials Science and Engineering, 2021. pp. 1-16. ISSN 1687-8434

Lu, Yubin and Cheng, Yongsheng and Sun, Yuancheng (2014) Numerical Simulation of Shock Resistant Microsystems (MEMS). Modern Mechanical Engineering, 04 (03). pp. 119-124. ISSN 2164-0165

Lv, Xin and Wang, Shuzhi and Qiu, Yu and Liu, Xiangxin and Gong, Fengqiang (2021) Study on the Influence of Tectonic Stress on Stability of Horseshoe-Shaped Tunnels. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

M

Mbinkar, Edwin N. and Asoh, Derek Ajesam and Kujabi, Sulayman (2022) Microcontroller Control of Reactive Power Compensation for Growing Industrial Loads. Energy and Power Engineering, 14 (09). pp. 460-476. ISSN 1949-243X

Mengen, Song (2023) Application of Segmental Prefabrication Method in Railway Bridge Construction. Journal of Engineering Research and Reports, 24 (12). pp. 115-119. ISSN 2582-2926

N

Naeeri, Salem and Kang, Ziho and Mandal, Saptarshi and Kim, Kwangtaek (2021) Multimodal Analysis of Eye Movements and Fatigue in a Simulated Glass Cockpit Environment. Aerospace, 8 (10). p. 283. ISSN 2226-4310

Ni, Yuancheng and Zhu, Eryu and Pilone, Daniela (2021) Combined Effect of Stray Current and Sustained Compressive Loading on Chloride Transport in Concrete. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

Nieto-Peroy, Cristóbal and Sabatini, Marco and Palmerini, Giovanni and Jeronimo de Oliveira, Élcio (2021) A Concurrent Testing Facility Approach to Validate Small Satellite Combined Operations. Aerospace, 8 (12). p. 361. ISSN 2226-4310

Nigus, Hailemariam (2014) Semi-Analytical Approach for Stiffness Estimation of 3-DOF PKM. Modern Mechanical Engineering, 04 (02). pp. 108-118. ISSN 2164-0165

Nwobasi, V. N. and Igbokwe, Philomena K. and Okewale, Akindele Oyetunde (2022) Empirical Modeling and Optimization of Base Activated Ngbo Catalysts in Esterification Reaction Using Response Surface Methodology. Journal of Engineering Research and Reports, 22 (8). pp. 1-20. ISSN 2582-2926

Nwokedi, Ikenna C. and Igbokwe, Philomena K. (2019) Chemical Process Absorption Column Design for CO2 Sequestration. Journal of Engineering Research and Reports, 5 (1). pp. 1-14. ISSN 2582-2926

O

Obadimu, Solomon O. and Kourousis, Kyriakos I. (2021) Compressive Behaviour of Additively Manufactured Lattice Structures: A Review. Aerospace, 8 (8). p. 207. ISSN 2226-4310 (In Press)

Ohaegbuchi, Dedacus N. and Chukwuemeka, Mebrim Charles and Awara, Gabriel (2022) Solution of Combined Heat and Power Economic Dispatch Problem Using Genetic Algorithm. Energy and Power Engineering, 14 (09). pp. 443-459. ISSN 1949-243X

Okaiyeto, S. A. and Unguwanrimi, Y. A. and Ogijo, S. I. and Jonga, B. J. and Sada, A. M. (2020) Comparative Studies of Two Developed On-farm Solar Dryers for Vegetables. Journal of Engineering Research and Reports, 10 (4). pp. 26-35. ISSN 2582-2926

Onyancha, Robert Birundu and Ukhurebor, Kingsley Eghonghon and Aigbe, Uyiosa Osagie and Osibote, Otolorin Adelaja and Kusuma, Heri Septya and Darmokoesoemo, Handoko and Modigunta, Jeevan Kumar Reddy (2022) A Methodical Review on Carbon-Based Nanomaterials in Energy-Related Applications. Adsorption Science & Technology, 2022. pp. 1-21. ISSN 0263-6174

P

Parel, Kurien S. and Chen, Zhou and Etsion, Izhak (2020) Strengthening and Weakening Effects in Bilayer Coated Spherical Contact. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Park, Yeon-Hyeok and Jo, Mun-Shin and Kim, Hun-Young and Ko, Dai-Ho and Oh, Hyun-Ung (2021) Development of On-Board Tilt Mirror Calibration Mechanism without Holding and Release Mechanism. Aerospace, 8 (10). p. 284. ISSN 2226-4310

R

Ramasamy, Lavanya and Miranda, Lima Rose and Hua, Ming (2022) Surface-Modified Adsorbent from Artocarpus heterophyllus Lam Biomass to Confine Reactive Red 194 in Real and Synthetic Effluents: Kinetics and Equilibrium Study. Adsorption Science & Technology, 2022. pp. 1-23. ISSN 0263-6174

Rokicki, Edward and Przysowa, Radoslaw and Kotkowski, Jerzy and Majewski, Paweł (2021) High Temperature Magnetic Sensors for the Hot Section of Aeroengines. Aerospace, 8 (9). p. 261. ISSN 2226-4310

Rus, Dorin and Florescu, Virgil and Bausic, Florin and Ursache, Robert and Sasu, Anca (2021) Graphical Assessment of the Linear Contact Steel on Composite Material at High Temperature and Pressure: A Recent Study. In: New Approaches in Engineering Research Vol. 8. B P International, pp. 26-37. ISBN 978-93-91473-64-8

S

Salari, Marjan and Sharma, Gaurav (2022) Optimization by Box–Behnken Design and Synthesis of Magnetite Nanoparticles for Removal of the Antibiotic from an Aqueous Phase. Adsorption Science & Technology, 2022. pp. 1-13. ISSN 0263-6174

Selvamsagayaradja, M. and Murugaiyan, V. and Sundarajan, T. (2023) Investigation on Expansive Soil Problems Associated with Damages in Low Rise Buildings along South East Coast of India: A Geotechnical Mapping Approach. In: Techniques and Innovation in Engineering Research Vol. 7. B P International, pp. 106-129. ISBN 978-81-959996-8-2

Sridevi, Veluru and Rathi, B. Senthil and Kumar, P. Senthil and Saravanan, A. and Hemavathy, R. V. and Karishma, S. and Jeevanantham, S. and Pamu, Sri Himaja and Rani, Lam Sudha and Prasad, K. S. N. V. and Kooh, Muhammad Raziq Rahimi (2022) Ultrasonic Functionalized Egg Shell Powder for the Adsorption of Cationic Dye: Equilibrium and Kinetic Studies. Adsorption Science & Technology, 2022. pp. 1-11. ISSN 0263-6174

Sun, Nannan and Song, Yifan and Hou, Wei and Zhang, Hanhao and Wu, Datong and Li, Yuan and Gong, Yuan and Cao, Qi (2021) Interfacial Bond Properties between Normal Strength Concrete and Epoxy Resin Concrete. Advances in Materials Science and Engineering, 2021. pp. 1-14. ISSN 1687-8434

U

Udeh, N. U. and Amah, V. E. (2022) Modelling the Adsorption of Lead (II) Ion from Aqueous Phase with Carica papaya Trunk Activated Carbon. Journal of Engineering Research and Reports, 22 (8). pp. 44-54. ISSN 2582-2926

W

Wada, Daichi and Araujo-Estrada, Sergio A. and Windsor, Shane (2021) Unmanned Aerial Vehicle Pitch Control under Delay Using Deep Reinforcement Learning with Continuous Action in Wind Tunnel Test. Aerospace, 8 (9). p. 258. ISSN 2226-4310

Wang, Chang and Huang, Minqi and Peng, Xianmin and Zhang, Guichuan and Tang, Min and Wang, Haowen (2021) Wind Tunnel Studies on Hover and Forward Flight Performances of a Coaxial Rigid Rotor. Aerospace, 8 (8). p. 205. ISSN 2226-4310

Wang, Yanjun and Hu, Rongjin and Lin, Siyuan and Schultz, Michael and Delahaye, Daniel (2021) The Impact of Automation on Air Traffic Controller’s Behaviors. Aerospace, 8 (9). p. 260. ISSN 2226-4310

Woloszyn, Marek A. (2023) Eco Aspects in Revitalisation Tenement Housing Quarters in Szczecin (PL). In: Techniques and Innovation in Engineering Research Vol. 7. B P International, pp. 97-105. ISBN 978-81-959996-8-2

Y

Yin, Kexin and Fauchille, Anne-Laure and Di Filippo, Eugenia and Othmani, Khaoula and Branchu, Samuel and Sciarra, Giulio and Kotronis, Panagiotis and Jia, Yunzhong (2021) The Influence of Mixing Orders on the Microstructure of Artificially Prepared Sand-Clay Mixtures. Advances in Materials Science and Engineering, 2021. pp. 1-15. ISSN 1687-8434

Z

Zakavi, S. J. and Nourbakhsh, M. (2014) The Ratcheting Behaviour of Stainless Steel Pressurized Piping Elbows Subjected to Dynamic Out-of-Plane Moments. Modern Mechanical Engineering, 04 (03). pp. 125-132. ISSN 2164-0165

Zhang, Feng and Wang, Dong-Sheng and Yang, Fan and Li, Tian-Yu and Li, Hong-Yan and Cui, Jian-Guo and Aparicio, Santiago (2021) Effect of Sodium Benzenesulfonate on SO42− Removal from Water by Polypyrrole-Modified Activated Carbon. Advances in Materials Science and Engineering, 2021. pp. 1-13. ISSN 1687-8434

This list was generated on Fri Oct 11 10:49:14 2024 UTC.